How to get a logo off a speaker or earbuds case

REMOVE is the verdict for this kind of logo

A printed logo on a speaker or earbuds case often wipes off with rubbing alcohol on a damp cloth in a few minutes. On a power bank, or anything with an open seam, skip the alcohol and cover the logo with a sticker.

Steps

  1. ALCOHOL

    1Grab rubbing alcohol, a soft microfiber cloth, and cotton pads.

    Use 70% alcohol or higher, and nothing stronger.

  2. LOGO

    2Power it off and unplug it.

    Leave it off until you’re completely done, drying included.

  3. ALCOHOLLOGO

    3Dampen the cloth, never the device, and test a hidden spot.

    The cloth should be damp, not wet. Dab the bottom, wait a minute, and check that the finish isn’t clouding, getting sticky, or losing color. If it is, stop and cover the logo.

  4. LOGO

    4Keep liquid away from ports, buttons, seams, and speaker grilles.

    Work only on the logo itself. If the cloth starts to drip, wring it out before you go on.

  5. LOGO

    5Rub the logo gently, then dry it right away.

    If it starts to lift, keep going. If nothing happens after a minute or two, stop. Let it dry completely before you turn it back on.

LOGOUNSWAG

Tips

  • Power bank, open seam, or something you can’t afford to damage? Skip the alcohol and cover the logo with a sticker.

We tried it

On October 8 we tried acetone on a power bank. The print turned gummy and the logo stayed, so it got a sticker. That’s why this guide stops at rubbing alcohol, and why power banks get covered instead.

Didn’t come off?

  • Finish going sticky? Soft-touch coatings can go tacky under alcohol. Stop at the first sign of it and cover the logo.
  • Ink not moving? Some prints are cured on. Don’t move up to acetone: on our power bank it turned the print gummy and the logo stayed.

Get the tools

The unswag kit has its own alcohol prep pads, so kit owners can skip buying them. $30. Ships free.

As an Amazon Associate I earn from qualifying purchases.

Stuck, or done?

Logo won’t budge, or not sure what kind it is? Send a photo to [email protected] and I’ll tell you what I’d try next. A real person reads every one.

If it worked, send the before and after too. We’ll ask before anything goes up on the Before and after wall.

Quinn

More guides