How to remove a printed logo from plastic
REMOVE, MAYBE is the verdict for this kind of logo
Rubbing alcohol wipes some printed logos off plastic in a few minutes. Other inks are cured on and won’t move, and when that happens, cover it.
Steps
-
1Grab rubbing alcohol, cotton pads, and a soft cloth.
Use 70% alcohol or higher, and nothing stronger. Acetone and nail polish remover can eat plastic.
-
2Test on a hidden spot first, like the bottom.
Dab a little alcohol, wait a minute, and check that the surface isn’t clouding, softening, or losing color. If it is, stop here and cover the logo.
Skip alcohol on clear acrylic, like display stands and see-through cases. It can leave a haze or fine cracks.
-
3Dampen a cotton pad.
Damp, not dripping, so the alcohol stays on the logo.
-
4Rub the logo gently in small circles.
Give it a few minutes. If ink starts showing up on the pad, keep going with a clean part of it. If nothing has changed after a few minutes, stop. Some inks don’t come off with alcohol.
-
5Wipe the area clean and let it dry.
Use the soft cloth, then look at it in good light. A faint shadow can stay where the print sat, especially on textured plastic.
Tips
- Won’t budge? Don’t move up to acetone. In our tests it turned one print gummy and left a clear case cloudy. A sticker covers it.
We tried it
On October 8 we tried acetone on two printed plastic items, which is how we landed on alcohol as the limit. The clear keychain lost most of its logo and went cloudy. The power bank’s print turned gummy and stayed.
Didn’t come off?
- No change at all? UV-cured and baked-on inks are bonded to the plastic. Anything strong enough to lift them also eats the plastic. Cover it.
- Shadow left behind? On textured plastic, the ink sits down in the grain where a pad can’t reach.
- Surface going sticky? Soft-touch coatings, the rubbery matte finish on power banks and remotes, can go tacky under alcohol. Stop at the first sign of it.
Get the tools
The unswag kit has its own alcohol prep pads, so kit owners can skip buying them. $30. Ships free.
As an Amazon Associate I earn from qualifying purchases.
Stuck, or done?
Logo won’t budge, or not sure what kind it is? Send a photo to [email protected] and I’ll tell you what I’d try next. A real person reads every one.
If it worked, send the before and after too. We’ll ask before anything goes up on the Before and after wall.
Quinn


